Application
The Belt Curve is simple and robust by design and is generally used for product transportation and in some applications queuing. Although the belt curve is designed specifically with the handling of airport baggage in mind, it is also well suited to handling of other products, such as, parcel handling, mail order, unit loads etc.
The belt curves used by Logan Teleflex are supplied from a choice of leading belt curve manufacturers. The choice of which supplier is sometimes at the specific request of the client or if no preference is stated is left to selection by Logan Teleflex who propose the most technically suitable and cost effect product to meet the needs of the client.
Features |
Application |
|
| Curve Angles | 30, 45, 60, 75, 90, 135 and 180 Degrees | |
| Conveyor Speed | 0.5, 0.6, 0.8, 1.0, 1.2 and 1.4 m/s | |
| Drive Powers | 0.75, 1.1, 1.5 and 2.2 kw | |
| Nominal Belt Width | 1000 mm or 1200 mm | |
| Product Load | 100 kg/curve | |
| Curve Type | Horizontal or Spiral Curves | |
| Sidewall Height | 400 mm (preferred) 450 mm or 500 mm. All sidewalls are removeable to facilitate belt replacement. | |
| Choice of drive packs | SEW as standard, others available as |
|
| Head Pulley Drive | Shaft Mounted Gearbox for Drive reliability and ease of maintenance | |
| Tapered End Pulleys | For Reduced gap to adjacent conveyor | |
| External Bearings on Pulleys using single size of bearing | Maintenance friendly bearing replaced | |
| High Bearing Life | Designed normally to L10 50,000 hr bearing life | |
| Belt Type | Smooth top or rough top, Fire Retardant Belting to ISO 340 Vulcanised or Clipper Joint |
|
| Underguarding | Sheet steel underguard | |
| Finish | Painted mild steel frame. Painted, galvanised or stainless steel sidewalls. |
|
| Reinforced bed plates | Increases load capacity of conveyor | |
| Quite Running During Operation | Noise level typically around 70 dBa, speed & location dependant |