×

Check-in conveyors

Check-In conveyors are the first point of interface between the passenger and the baggage handling system.

Model 599 Check-In Conveyors allow passengers to safely enter their baggage onto the conveying system. They also allow the check-in desk clerk to weigh and label the baggage. The Model 599 check-in conveyor range has been designed to meet the specific needs of airports. Our weigh, label and despatch conveyors can be configured as either one, two or three stage check-in systems, offering choice and flexibility for check-in operations.

The Model 599 check-in conveyors are finished in stainless steel to a very high quality. As standard they are fitted with dummy end pulleys to eliminate trap points for passengers, operators, bag straps and labels. For extra security safety gates may be fitted to the weigh conveyor preventing passengers from entering the check-in areas when the desks are closed.

Features

  • Motorised Drive Drums
  • Short Faced End Pulley
  • Conveyors Mounted on Guide Wheels
  • Plug and Play
  • Drop Down Front Cladding Panel
  • Diamond Profile Belting
  • Fire Retardent Belting to ISO 340
  • Modular Design
  • Design Flexibility
  • Reinforced bed plates
  • State of the Art PLC Controls

Application Benefits

  • Compact conveyor design with proven reliability
  • Eliminates trap points by the use of dummy pulleys
  • Complete unit can be easily withdrawn for maintenance and cleaning
  • Interchangeable conveyors enables remote maintenance
  • Facilitates the removal of weigh conveyor without special tooling
  • Allows the handling of bags with wheels or castors
  • Reduces the spread of fire
  • Facilitates installation and any subsequent modifications
  • Accommodate variations such as side wall height, bed width, drive components etc
  • Increases load capacity of conveyor
  • Use of standard PLC technology enables clients handling / screening schemes to be complemented

Model 599 Check-In Conveyor — Stage Options

One Stage: Bags are weighed, labelled and despatched on a single conveyor.
Two Stage: Usually the weighing and label operations are carried out on a single conveyor. Baggage is injected onto the collector conveyor from the despatch conveyor.
Three Stage: Separate conveyors are used for the weigh, label and despatch functions.

General Construction Weigh, Label and Despatch Conveyors:

Drive/Head Pulley

135 mm diameter 0.75 kw motorised drum mounted within moulded end caps. The face width of the drum is narrower than the belt, and the end caps are formed such that they act as a dummy pulley (or static shroud).

Tail Pulley

75 mm diameter end pulleys are machined and fitted to 20 mm diameter bright mild steel axles mounted in sealed for life precision bearings. The face width of the pulley is narrower than the belt, and plastic bushes are located at the end of the shaft to act as dummy pulleys.

Drive & Tail Snubber Pulley

The Drive Snubber Pulley is 75mm diameter, the tail pulley is 50 mm diameter. The drive snubber pulley ensures that the pulley wrap on the drive drum is kept to a maximum. Both are screw adjustable for belt tracking and tensioning purposes.

Sidewalls

Sidewalls are formed from 2.0 mm thick Stainless Steel. The sidewalls are bolted to both sides of the bed section, additionally there are formed mild steel cross members which connect the two sides together underneath the bed section. This ensures good rigidity. The sidewalls can be quickly removed for maintenance or cleaning purposes.


Bed Section

Press-formed box channel section from 2.5 mm thick mild steel, width equal to belt width plus 20 mm and 50 mm deep.

Stainless Cladding

The front panel is manufactured from 2.5 mm thick stainless steel. The Logan Teleflex logo is fixed onto this panel. The panel can be unlatched and pivoted upwards to allow access under the conveyor for cleaning, and to facilitate conveyor removal. The outer sides of all conveyors in full public view will be clad with 1.6 mm polished stainless steel panels.

Tracks and Castors

The weigh conveyor is mounted on castors which run in a track fixed to the top of the weigh scale. The conveyor is retained in its normal operating position by a latch bolt. Access to the latch is via the hinged stainless steel plate on the front of the conveyor. This allows rapid removal of the unit for cleaning and maintenance purposes.

Belt

Two ply polyester endless with PVC cover and diamond pattern top.


BW = Belt width
WCL = Weigh conveyor length
LCL = Label conveyor length
DCL = Despatch conveyor length

Typical View of a 3 Stage Check-in

Check-in conveyors

(.pdf 349 Κα)

Download